Product Name: on behalf of Tower 102012PP helmet 
 Product Type: QUARTZ1 (102012) 
 Size: Adjustable 
 Color: blue, yellow, white, red 
 Product Description: UV resistance of high-density polypropylene helmet. Polyethylene liner, sweat band, jack rear hoop adjustment. 
 Material: polypropylene (PP) 
 Weight: 334 g 
 Instructions for use: The helmet can absorb the impact of energy released, the hat will produce some of the damage or damage to the cap shell and cap lining, even if such damage is not immediately found, the proposed replacement suffered a serious crash helmets. 
 In order to ensure adequate protection performance, the helmet should be adjusted to fit the head size. Please note that In addition to helmet manufacturers recommend changes and remove the parts, any change or remove any original parts may cause danger. The helmet should not increase with any non-helmet manufacturer's recommended attachments. Recommended by the manufacturer of paints, solvents, adhesives or label on the helmet is prohibited. In order to ensure effective protection, the visor should be forward (straight direction) through the rear of the helmet ratchet adjustment system (size :53-63cm), adjust the helmet to adapt them to the head size (not too loose or extruded) . 
 Disable: Disable the use of this product in the circumstances described above provisions. Helmet life affected by many factors, such as cold, heat, chemicals, sunlight and improper use. Need to do daily checks to identify helmets, helmet, cap liner and fragile accessories are signs of cracks, defects. If the helmet has been hit or wear should be replaced immediately. If not defective, then the helmet can use. Date of manufacture marked on each cap. The case of normal use, after the first use, the helmet will provide effective protection of two to three years; or production after five years of effective protection. This helmet does not contain cause allergic reactions of substances. Sensitive populations, an allergic reaction, should leave the danger zone, took off his helmet, consult a doctor. 
 Storage instructions: If you no longer use or products in transit, the helmet should be stored in a cool dry place, away from light frost. Avoid chemicals or sharp objects to fall on, resulting in the helmet damage deformation. 
 Cleaning / Maintenance Description: This helmet is available dipped a cloth of low concentrations of cleaning agents. Prohibit the use of any abrasive, corrosive chemicals. If the helmet can not use this method of cleaning, replace it. 
 Performance: This helmet meets the European Directive 89/686, safe, comfortable, breathable, and meet the European standard EN397: 1995/A1 (-10 ° the C / +50 ° C). 
 Company Name: Shanghai Chang Industrial Co., Ltd. 
 Fixed -51,029,651 or 400-600-7758 
 Fax :021 -62,601,731 
 Phone: 13795322253 
 Address: Oasis Plaza, 3064 Zhongshan North Road, Putuo District, Shanghai, 15th Floor, Block B, 
 The company's Web site. Http://www.myehs.cn